Avoid the threat of mud stains to your perfectly clean carpets, with our powerful Vanish Gold Oxi Action 3in1 Stain Removal Spray lifting those annoying stains first time.

As mud stains on clothing can be a little tricky to remove, use Vanish Gold Oxi Advance Multi Power Powder. Soak the garment with Vanish, before washing as usual with your normal detergent and an added dose of Vanish!

Read on for instructions on how to get best results on your mud stain.

How to Remove Mud Stains from Clothes

To remove Mud Stains from cotton or polycotton, start by removing as much excess as possible. Then use either Vanish Napisan Oxi Advance Multi Power Powder for your colours or Vanish Napisan Oxi Advance Crystal White Powder for your whites.

How to Remove Mud Stains from Clothes

Recommended

Vanish Napisan Oxi Advance Multi Power Powder

Vanish Napisan Oxi Advance Multi Power Powder

Vanish Napisan Oxi Advance Crystal White Powder

Vanish Napisan Oxi Advance Crystal White Powder

Instructions

  1. Fully dissolve ½ scoop (30g) in 7L of warm water (max 40°C).
  2. For best results soak whites or colours for 2 hours.
  3. After soaking, wash as usual or rinse thoroughly. Tough stains may require repeat applications.
  4. For best results on stains, rub stains before rinsing.

Important: Before using Vanish Napisan Oxi Advance, you should always follow the usage instructions on the packaging and follow its care advice.

How to Remove Mud Stains from Carpets & Upholstery

To remove Mud Stains from your carpets and upholstery, start by removing any excess. Next, use Vanish Preen Oxi Action 3in1 Stain Removal Spray and follow these simple steps:

How to Remove Mud Stains from Carpets & Upholstery

Recommended

Vanish Preen Oxi Action Gold 3in1 Stain Removal Spray

Vanish Preen Oxi Action Gold 3in1 Stain Removal Spray

Instructions

  1. Prepare: Remove excess dirt and stain. Turn the nozzle’s trigger to ON position whilst directing the trigger away from face. Then turn to OFF Position after use of the product. DO NOT squeeze trigger in OFF position as this may cause the product to split when turned ON
  2. Apply: Spray on the stain and leave for max 5mins.
  3. Clean: Blot the stain and remove excess product using a clean cloth. Repeat as necessary until stain is removed. Ensure the surfaces are dry before stepping or sitting on them.

Before use check for colour fastness by testing a hidden area of the fabric, rug or carpet. Always follow the usage instructions on the packaging and follow its care advice.